1. Guide2
    1. What's TerrainAxe?
    2. Make a quick menu for TerrainAxe and your ms files
  2. Reference135
    1. Select(Poly)14
      1. SelectBorder
      2. RingEgs
      3. FcsToRingEgs
      4. Findborder
      5. Nextegs
      6. CoverFcs
      7. VertsToEgs
      8. InnerVerts
      9. InnerEgs
      10. FacesByID
      11. AdjFcsByID
      12. SameDirFaces
      13. GetQuadFaces
      14. RoadSides
    2. Create(Poly)18
      1. StitchPoly
      2. QuickStitch
      3. SweepEdge
      4. PiecePoly
      5. PlaceMesh
      6. StitchVerts
      7. PCloudToMesh
      8. AppendPoly
      9. LoftSplines
      10. FreePoly
      11. ShapeEdge
      12. DragPoly
      13. CapEdges
      14. CrossRoads
      15. Auto Stairs4
        1. FreeStair
        2. IrregularStair
        3. FacesToStair
        4. CapStairSides
    3. Construct(Poly)23
      1. MoveVerts
      2. InsertX
      3. ProjToFace
      4. ConformToRoad
      5. AdvConnectVts
      6. ZAlignFace
      7. ZAlign3P
      8. SlopePlanar
      9. Round Verts4
        1. RoundVerts
        2. RoundVts(3P)
        3. RoundVts(Rad)
        4. RoundVts(TT)
      10. Smooth Road Tools6
        1. SMRoadByLines
        2. SmoothRoad
        3. SMRoad(Linear)
        4. SMRoad(NPts)
        5. SMRoad(Blur)
        6. SMRoad(Curve)
      11. Weld Tools5
        1. Weld1VertToEg
        2. Weld2VertsToEg
        3. SuperWeld
        4. WeldVerts&Egs
        5. XWeld
    4. Cut(Poly)18
      1. ConnectVerts
      2. Cut2Egs
      3. Cut2Verts
      4. PivotCenBot
      5. CutByAgl
      6. CutBydir
      7. CutPerToEdge
      8. EvenConnect
      9. ClearJags
      10. Slice
      11. SliceByEdges
      12. SliceByLines
      13. SliceByFcs
      14. SliceXY
      15. SliceByGrid
      16. SliceBy3P
      17. Trianglate(Faces)
      18. EncloseVerts
    5. UV(Poly)8
      1. IDByElm
      2. IDByFace
      3. PaveCourts
      4. RingMap
      5. Advanced UV Tools4
        1. RoadPaver
        2. PaveNoTear
        3. PaveWall
        4. Advanced UV Tools
    6. Others(Poly)14
      1. SnapToP
      2. MoveOnDir
      3. SnapZ
      4. ZMove
      5. AdvClearMidVts
      6. ClearMidVerts
      7. Flatten Edges
      8. RightAgl
      9. ClearChaosEgs
      10. IDSet
      11. Check_NarrowFcs
      12. Extend
      13. ClearDarkVerts
      14. ExtendVerts
    7. Render6
      1. AbsorbMat
      2. ArrangeMats
      3. SimpleTerrMat
      4. MtlNeaten
      5. UvwCamera
      6. Vrcam
    8. Scenes5
      1. TrafficLineSys
      2. AdvArray
      3. Collapse
      4. RoadNetwork
      5. UCS
    9. Common21
      1. DropToTerrZN
      2. DropToTerrain
      3. CCWShp
      4. FreeSpline
      5. FlatShps
      6. RefRotate
      7. MoveObjs
      8. Explode
      9. SubdivSpls
      10. DwgImport
      11. BlackWire
      12. DelEmptyObj
      13. Copy
      14. Paste
      15. PickPivot
      16. ClearSel
      17. ConnectKnots
      18. LockTransform
      19. ResetFile
      20. ResetXform
      21. BBoxToTerrain
    10. Manager8
      1. AxeSetting
      2. Clean Layers
      3. Simple Display
      4. QuickMenu
      5. LifuBar
      6. UIMan
      7. On/Off TheAxe
      8. SegsVsArc

SweepEdge

Introduce

With SweepEdge ,you can use a border(made up with edges that has 1 face) as an underlying path along which to extrude a cross-section .Paths can also contain splines or NURBS curves.The initial main purpose of SweepEdges is to create big amount of curbstones and sideways,then it was added many new features. Because it is designed for terrain modeling ,so the cross-section will always be up-right to avoid getting a twist result. The main features of SweepEdge as below:

  1. Create big amount of curbstones and sideways;

  2. Create new faces by offset a border;

  3. Create Stairs along mulitiple paths;

  4. Sweep with your own cross-Section,which can be stored for later use.

How To

  1. Curb:Used to create curbstone,the cross-section is an open rectangle ,you also can create curbstone with side-way,grass ground,or offset a path to create a polygon strip.

    Creat curbs of the road

  2. Stair:Clone a step Repeatedly as cross-section ,sweep along a path to create stair.

    Create Stairs

  3. Custom:Use yourself pre-made cross-section to sweep ,you can draw any spline for your cross-section and store it for reusing later ,the procedure can also multiplly clone cross-section to form a new cross-section.

    1. Create belts for the road

    2. Store Section

    3. Use customized sections,Right-click on "Pick Section" button to pop up the section library window

    Create belts for the road

Parameters

Tips

Note That

=>Previous Version of Help

---Total 11,967 views---